|
 |
Overview
The filling and sealing machines of the FLM series are developed to fill and close injection and infusion bottles. They stand out by their innovative design with a vertical machine plate. The wide processing range of up to 500 ml and the high output of up to 36,000 containers per hour mark the flexibility of the machine.
|
Facts
- GMP-compliance
- Balcony construction, vertical machine plate, strict separation of the production and drive sections
- Slim machine design (reach depth 600 mm) allows good accessibility and all maintenance work to be done from one side, very small aseptic area
- Flexible machine design allows any type of installation: detached sterile room installation, RABS (Restricted Access Barrier System), in-wall installation or
 isolator technology
- Wash down cleaning possible
- Smooth vial handling, containers are carried (no sliding movement), central regulation, few format parts
- Containers stand freely in the LF stream
- Automatic format change, reproducible production conditions by storable filling programs
- Stopper sorting with centrifugal sorting system, vertical stoppering wheel
- Touch screen panel
- Teleservice by modem available
- Filling system: rotary valve piston pumps or rolling diaphragm pumps, atime pressure filling system or a mass flow filling system
- Additional equipment available: e.g. CIP/SIP systems (Cleaning-in-Place, Sterilizing-in-Place), in-process-control, gassing system.
|
Function description
|
Contact
|
Technical information
|
| |
Characteristics of the Machine FLM |
|
|
|
Container: |
|
Processing
range |
|
Adjustable
output |
|
|
|
Injection bottles: |
|
Ø 14 - 55 mm Height up to100 mm |
|
up to 36.000 per hour |
|
|
|
Infusion bottles: |
|
Ø 46-86 mm Height up to 177 mm |
|
up to 7.680 per hour |
|
|
|
|
|
|
|
|
|
Rights to make technical alterations reserved
|
|
|
|
Startpage Bosch.de
back to top