|
 |
Overview
The Pack 401 is a sophisticated wrapper with a wide array of options, developed for mid- to high speed performance with semi- and fully automatic solutions. It will further expand the portfolio of the next generation of Bosch horizontal flowpack machines. It is developed in cooperation with other companies within the Bosch Packaging Group, combining experience and application know-how on a global basis.
This new wrapper deals with the needs of everyone, whether they are small scale manufacturers or high volume producers. Its improved flexible modular design allows the machine to be adapted quite easily to the different requirements of you as our customers, even when the machine is already used in production.
|
Facts
Main features:
- Compact, cantilevered design;
- 3 sets of sealing rollers each built in a separate hygienic housing.
- 2 film reel holders with a width of 450 mm and manual splicer table.
- Quick exchangeable folding box.
Control platform:
- Bosch Controller (C100B) for Logic, Motion & visualisation.
- Bosch (C112) Human Machine Interface (HMI), high resolution 12,1 inch colour TFT touch screen panel, with DVI and USB interface controller;
- HMI software VisiWinNET with 4 Separate access levels.
- On board UPS (Gold caps) for data protection.
- All software and recipes on Flash Card.
- Pre-programmable controls for up to 50 product for fast changeover.
- No moving parts in control system.
- Temperature settings via display HMI.
- Integrated stainless steel cabinet.
Some options:
- Extension of the infeed table per 1.000 mm.
- Wider film tower execution of 650 mm.
- Self-centring film reel holders.
- End of film and film breakage detection.
- Automatic splicer.
- End of film cutting mechanism.
- Servo controlled film drive in front of folding box.
- Cold seal film unwind peeling rollers.
- Automatic film tracking correction.
- Separate drive of 1st set of fin seal roller.
- Air evacuation device for tight packages.
- Fin seal folding by driven 4th set of rollers.
- No product - no bag.
- Gusseting device.
- Punch/ Euro hole.
- No gap - no seal.
- Slat conveyor through cross seal head.
- Compressed air reject of incorrect packages.
- Vacuum controlled position fixation of products on the discharge belt.
|
Function description
|
Contact
|
Technical information
|
| |
Technical Details Pack-401 |
|
|
|
Max. reel diameter: |
|
400 mm |
|
|
|
Max. reel weight: |
|
40 kgs |
|
|
|
Max. film width: |
|
450/ 650 mm |
|
|
|
Film inner core diameter: |
|
70/ 76 mm |
|
|
|
Fin seal height: |
|
11/ 14/ 20 mm |
|
|
|
Cross seal width: |
|
20/ 25 mm |
|
|
|
Number of sealing jaws: |
|
1-up/ 2-up/ 3-up |
|
|
|
Nominal cut off length: |
|
1-up: 314/ 377/ 471/ 565 mm
2-up: 157/ 189/ 236/ 283 mm
3-up: 105/ 126/ 157/ 188 mm |
|
|
|
Maximum capacity: |
|
1-up: 200 packages per minute
2-up: 400 packages per minute
3-up: 600 packages per minute |
|
|
|
Maximum film speed: |
|
Approx. 80 meters/minute |
|
|
|
Pneumatics: |
|
Minimum 6 bar, 80 psi |
|
|
|
Colour: |
|
RAL 9006 Str. FDA approved |
|
|
|
Working height: |
|
650/ 850/ 930 mm |
|
|
|
|
|
|
|
|
| |
Electrical Data |
|
|
|
Standard power supply: |
|
3N ~ 400 VAC |
|
|
|
Power supply frequency: |
|
50 or 60 Hz |
|
|
|
Power requirement: |
|
6 kVA |
|
|
|
Control circuit: |
|
24 VDC |
|
|
|
|
|
|
|
Rights to make technical alterations reserved
|
|
|
|
Startpage Bosch.de
back to top